Foot Pedals

Options

Foot Pedals

Standard foot pedal (single pedal) is available for all machines except P20NMS, P32NMS, P51MS, P60MS and service line machines.

Standard feature for FP160/165, FP170/175, KC800, KC1200, KC2000, SP100, SP350, SP1200, SP2000 and NC machines.

Electrical backstop and foot pedal share the same J2 connector. They cannot be used simultaneously. On ICC controlled machines AUX-mode is used for foot pedal and electrical backstop operation.

SINGLE FOOT PEDAL CAN BE INSTALLED AS AN OPTION FOR DOUBLE FOOT PEDAL CAN BE INSTALLED AS AN OPTION FOR
FP20 / FP120 / FP140 / FP145 P20NMS / P32NMS
CC22 / CC26 P51MS / P60MS
P20SCC / P32SCC
P51SCC / P60SCC / P70SCC

The foot pedal enables holding the hose assembly with both hands.

In P20NMS, P32NMS, P51MS and P60MS machines foot pedal is double pedal. One pedal is for crimping and the other one for opening. When foot pedal is connected, dies will move as long as the foot pedal is pressed or till the set
crimping diameter has been reached. Crimping can be interrupted by lifting the foot from the pedal. After reaching the crimping diameter dies are opened by using the other pedal.

Single foot pedal part number: 691563.

Double foot pedal part numbers: 676906 for P20NMS, P32NMS, P51MS and P60MS.